Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 215
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Interval
This command displays the interval over which performance data is calculated for
all types of data and for all output ports.
Command Syntax:
show interval
Example:
tc1000>show interval
Response:
port - 1
MTIE-t - 35
Jitter - 10
FER - 10
Jitter - 10
port - 10
MTIE-t - 35
FER - 10
Jitter - 10
port - 11
MTIE-t - 35
FER - 10
Jitter - 10
port - 12
MTIE-t - 35
FER - 10
Jitter - 10
Related: set interval
Level : User, Power-User and Admin
Set Interval
This command allows you to provision the interval over which performance data is
calculated for the specified type of data (P-P Jitter, MTIE-t, FER) and for the
specified output ports.
Command Syntax:

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English