Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 223
Appendix B Command Descriptions and Communications Interface
CLI Commands
.
Related:
show ip, set ip-mode, set ip-state
Level : Power-User and Admin only
Notes:
IPv6 is not supported in this release.
If a gateway address is configured, but the gateway device is not
functioning or is not connected, then the Ethernet interface will not
function.
Use set ip-state {port} restart after configuring the IP
interface.

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English