Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 227
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Log-size
Use this command to display the specified log buffer, the maximum number of
kilobytes stored in the file before it is rotated.
Command Syntax:
show log-size
Example:
To display the sizes of the logs -
tc1000>show log-size
Response:
performance - 100
ntp - 100
alarm - 100
event - 100
command - 100
security - 100
Level : User, Power-User and Admin
Set Log-size
Use this command to provision the specified log file buffer size, the maximum
number of kilobytes to be stored in the file before it is rotated.
Command Syntax:
set log-size {performance|ntp|alarm|event|command|security}
<size>
Example:
To set the size of the ntp log to 75 kilobytes-
tc1000>show log ntp 75
Remarks: The range is 0 to 100 kilobytes. Provisioning a log file size to zero
disables the logging of that type of data.
Related:
show log
Level : Power-User and Admin

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English