Symmetricom TimeCreator 1000 User Manual

228 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Show Log-Interval
This command displays the user provisioned log intervals.
Command Syntax:
show log-interval
Example:
To display the intervals of the perfromance log -
tc1000>show log-interval
Response:
Performance - 60
Related: show log
Level : User, Power-User and Admin
Set Log-Interval
Use this command to provision the interval for the specified log. The interval is the
time, in seconds, between successive log entries. Only the performance log can be
provisioned.
Command Syntax:
set log-interval performance {interval}
Example:
To set the interval between successive log entries for the perfromance log to a value
of 75 seconds -
tc1000>set log-interval performance 75
Remarks: Setting the log interval to zero disables logging. The range is 10 - 86,400.
Related:
show log
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English