Symmetricom TimeCreator 1000 User Manual

097-93100-01 Revision C – February, 2010 TimeCreator 1000 User’s Guide 235
Appendix B Command Descriptions and Communications Interface
CLI Commands
Set ntp-authentication
This command provisions NTP authentication.
Command Syntax:
set ntp-authentication {enable|disable}
Example:
To enable NTP authentication:
tc1000>set ntp-authentication enable
Remarks: The NTP service must be disabled and then enabled with the Set
Service command for changes to take effect. This configuration is not used in the
client-server mode of NTP.
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English