Symmetricom TimeCreator 1000 User Manual

234 TimeCreator 1000 User’s Guide 097-93100-01 Revision C – February, 2010
Appendix B Command Descriptions and Communications Interface
CLI Commands
Remarks: Valid key ID range is 1 to 65534. The poll interval is 2
z
seconds, where z
= <poll value>. Valid poll intervals are 16 to 1024 seconds, which corresponds to a
range of <poll values> of 4 to 10. The NTP service must be disabled and then
enabled with the Set Service command for changes to take effect. If a key ID is
specified, then authentication is used when connecting to the NTP server. The key
must be defined with the Set NTP-Key command. A maximum of 8 NTP servers can
be specified.
Level : Power-User and Admin only

Symmetricom TimeCreator 1000 Specifications

General

Brand	Symmetricom
Model	TimeCreator 1000
Category	Server
Language	English