Teknim VAP416 - Page 78

VAP416 Installation & Operation Manual
TD-1/07-004
78 / 81
ADR.
FUNCTION
VALUE
DEFAULT
VALUE
DETAILS
INST.
VALUE
45 01
45 02
:
45 29
User Limitations
User 1
User 2
:
User 29
1.option=User can not Arm
2.option=User can not Disarm
5.option=User can not make Bypass
Nothing
Selected
MP
Page:64
45 30
Guest Limitation
1.option=User can not Arm
2.option=User can not Disarm
3.option=One time usable code
4.option=Daily Code
5.option=User can not make Bypass
4 Selected
MP
Page:64
50 01
Central Monitoring Station
(CMS) & User Phone Dialer
Settings
1.option=Communicator enable/disable (*)
2.option=Dialer enable/disable (**)
4.option=Cancel calls on disarm ON/OFF
5.option=Alarm on Tel. Line Fail ON/OFF
6.option=Confirm by single button ON/OFF
7.option=Terminate on confirm ON/OFF
8.option=Make Alarm silence on confirm ON/OFF
* 1.option is enabled automatically when any of
communicator number (05 01,...05 04) is entered.
** 2. option is enabled automatically when any of dialer
number (06 01,...06 08) is entered.
4 Selected
IP
Page:65
50 02
Dial Attempt
1...15 times
3 times
IP
Page:66
50 03
CMS Answer Wait Time
10...60 seconds
30
seconds
IP
Page:66
50 04
CMS Periodic Test Report
Range
1...48 hours
24 hours
IP
Page:66
50 05
CMS First Periodic Report
Time
HH MM HH=hour, MM=minute
00:00
IP
Page:66
50 06
Interval Between Calls
1...30 seconds
3 seconds
IP
Page:67
50 07
50 08
Communication Format
CMS 1
CMS 2
0=ContactID
2=SIA
0
IP
Page:67
50 11
50 12
50 13
50 14
50 15
CMS to which messages will
be sent
Out of Partition
Partition A
Partition B
Partition C
Partition D
1.option=Call CMS 1
2.option=Call CMS 2
Note: SPT uses settings of 50 11.
1 Selected
IP
Page:68
For SPT:30
50 16
50 17
50 18
50 19
50 20
User Phones to which
messages will be sent
Out of Partition
Partition A
Partition B
Partition C
Partition D
1.option=Call User number 1
2.option=Call User number 2
: Note: SPT uses settings of
: 50 16.
7.option=Call User number 7
8.option=Call User number 8
All
Selected
IP
Page:68
For SPT:30