Tormach PCNC 440 - 8.2.2 Spray Coolant; 8.2.3 Coolant Hose and Accessories; 8.2.4 Tramp Oil Pillow; 8.3 Mill Options

Chapter 8
154
UM10372_PCNC440_Manual_0221A
ACCESSORiES
8.2.2 Spray Coolant
The Fog Buster Spray Coolant Kit is a non-fogging, non-atomizing, low-pressure sprayer with 115 VAC
solenoid valve included to integrate via M7/M8/M9 program commands; requires 90 psi air supply.
PN Description
32682 Fog Buster Spray Coolant Kit
8.2.3 Coolant Hose and Accessories
Addional coolant hose, nozzle styles, valves,
manifolds, and ngs are available to design a custom
ood-coolant system for any PCNC mill. Individual
coolant systems are also available (see Figure 8.4).
PN Description
33215 Coolant Hose Accessory Kit w/ Pliers
8.2.4 Tramp Oil Pillow
These absorbent pillows are placed inside the coolant
tank to remove excess tramp oil from the coolant system.
PN Description
31925 Floang Tramp Oil Collecon Pillow
8.3 Mill Options
8.3.1 LED Spindle Light
This is a bright LED work light that mounts to the
spindle nose of any PCNC mill (see Figure 8.5).
PN Description
34846 LED Spindle Light Kit
8.3.2 External Contactor Kit
The oponal External Contactor Kit allows for control
of high-current devices (<1A) using M7/M8/M9
program commands via the controlled outlet marked
Coolant on underside of the electrical cabinet. Rated
operaonal current is 95 A (AC3 usage @ 380 VAC).
PN Description
33044 External Contactor Kit
Figure 8.4
Figure 8.5