C69552
C69553
C69615
C92868
SST
C69617
41–54
–MANUAL TRANSMISSION/TRANSAXLE INPUT SHAFT ASSY (E351)
2184Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
7. REMOVE 2ND SYNCHRONIZER OUTER RING
(a) Remove the 2nd synchronizer outer ring from the trans-
mission clutch hub No.2.
8. REMOVE 4TH GEAR BEARING SPACER
(a) Remove the 4th gear bearing spacer from the transmis-
sion clutch hub No.2.
9. REMOVE 3RD GEAR
(a) Using 2 screwdrivers and a hammer, remove the clutch
hub No.2 setting shaft snap ring from the input shaft.
NOTICE:
Using a waste to prevent the snap ring from being scat-
tered.
(b) Using SST and a press, remove the transmission clutch
hub No.2 and 3rd gear from the input shaft.
SST 09950–00020
NOTICE:
Do not tighten SST excessively.
10. REMOVE 3RD GEAR NEEDLE ROLLER BEARING
(a) Remove the 3rd gear needle roller bearing from the input
shaft.
To Next Page
Loading...
