Toyota 2002 Camry - Page 726

C70506
A
B
C92871
SST
C69660
C69617
41–58
–MANUAL TRANSMISSION/TRANSAXLE INPUT SHAFT ASSY (E351)
2188Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Using a vernier calipers, measure the transmission hub
sleeve No.3 groove and the thickness of the claw part on
gear shift fork No.1, and calculate the clearance.
Standard clearance:
0.15 – 0.35 mm (0.0059 – 0.0138 in.) {A – B}
If the clearance is out of the specification, replace the transmis-
sion hub sleeve No.2 and gear shift fork No.2 with the new one.
20. INSTALL INPUT SHAFT FRONT BEARING
(a) Using SST and a press, install the input shaft front bear-
ing (inner race).
SST 09608–00071
21. INSTALL TRANSMISSION HUB SLEEVE NO.2
(a) Coat the transmission hub sleeve No.2 with gear oil.
(b) Install the 3 synchromesh key springs with transmission
hub sleeve No.2.
NOTICE:
Do not install the transmission clutch hub sleeve No.2 and
the transmission clutch hub No.2 incorrect orientation.
(c) Using a screwdriver, install the synchromesh shifting key
to the input shaft.
22. INSTALL 3RD GEAR NEEDLE ROLLER BEARING
(a) Coat the 3rd gear bearing with gear oil, install it to the in-
put shaft.