C69553
C69552
C69551
C69633
C92857
SST
41–60
–MANUAL TRANSMISSION/TRANSAXLE INPUT SHAFT ASSY (E351)
2190Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
26. INSTALL 4TH GEAR BEARING SPACER
(a) Coat the 4th gear bearing spacer with gear oil, install it to
the input shaft.
27. INSTALL 2ND SYNCHRONIZER OUTER RING
(a) Coat the 2nd synchronizer outer ring with gear oil, install
it to the transmission clutch hub No.2.
NOTICE:
Align the claw of the clutch hub No.2 with the notch of the
2nd synchronizer outer ring and assemble.
28. INSTALL 4TH GEAR NEEDLE ROLLER BEARING
(a) Coat the 4th gear needle roller bearing with gear oil, install
it to the input shaft.
29. INSTALL 4TH GEAR
(a) Coat the 4th gear with gear oil, install it to the input shaft.
30. INSTALL INPUT SHAFT REAR RADIAL BALL
BEARING
(a) Using SST and a press, install the input shaft rear radial
ball bearing to the input shaft.
NOTICE:
Make the groove on the bearing face to the rear and
install.
Make sure that the 3rd gear rotates.
SST 09608–06041
To Next Page
Loading...
