Toyota 2002 Camry - Page 851

F41568
F41587
Fulcrum
Length
SST
F41586
Fulcrum
Length
SST
F41602
51–46
–POWER STEERING RACK & PINION POWER STEERING GEAR ASSY
2313Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Connect the tube clamp with the bolt.
Torque: 9.8 N⋅m (100 kgf⋅cm, 86 in.⋅lbf)
62. CONNECT PRESSURE FEED TUBE ASSY
(a) Using SST, connect the pressure feed tube assy to the
rack & pinion power steering gear assy.
SST 09023–12700
Torque: 22.5 N⋅m (229 kgf⋅cm, 17 ft⋅lbf)
HINT:
 Use a torque wrench with a fulcrum length of 300 mm
(11.81 in.).
 This torque value is effective in the case that SST is paral-
lel to a torque wrench.
(b) Using SST, connect the return tube assy to the rack & pin-
ion power steering gear assy.
SST 09023–12700
Torque: 22.5 N⋅m (229 kgf⋅cm, 17 ft⋅lbf)
HINT:
 Use a torque wrench with a fulcrum length of 300 mm
(11.81 in.).
 This torque value is effective in the case that SST is paral-
lel to a torque wrench.
(c) Install the return tube clamp with the nut.
Torque: 9.8 N⋅m (100 kgf⋅cm, 86 in.⋅lbf)