TransCore encompass 4 - Page 275

Command Quick Reference
D-11
527 Display RF status RFST Cx Ox Tx Fxxx Rxx Gxx
Axx Ixx
C0 = RF controlled by host
C1 = RF-by-presence sensor
O0 = RF off
O1 = RF on
T1 = uniqueness timeout of 2
min
T2 = uniqueness timeout of 15
sec

T3 = uniqueness timeout of 30
sec

Fxxx = RF output frequency,
xxx = 000 to 118
Rxx = Tag decoder range
(distance) for ATA tags, 00 to 1F
hexadecimal range value

Gxx = Tag decoder range
(distance) for eGo Plus Tags, 00
to 1F hexadecimal range value

Axx = RF power attenuation, 00
max to 0A min (10 dB less than
max)

Ixx = IAG RF power attenuation,
00 max to 0F min (15 dB less
than max)
Note If you enter RF settings
using command
#642NN, the display
command for RF output
frequency, F is "Fxx" and
indicates use of the
backward-compatible
frequency entry method.
Table D-2 Encompass 4 Reader Commands Listed Numerically (continued)
Number Command Name Reader Message