System Menu
ADVANCED OPERATION GUIDE 6-15
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original/Paper Setup and then
[Change] of Paper Source for Cover.
3
Select the paper
source to load cover
paper.
4
Press [OK].
Special Paper Action
To print on Prepunched, Preprint, and Letterhead, punch-holes might fail
to be aligned or print direction might be upside down depending on how to
set the originals and combination of copying functions. In such a case,
select [Adjust Print Direction] to adjust the print direction. When paper
orientation is not important, select [Speed Priority].
Common Settings - Paper Source for Cover
Select cassette for cover paper.
Cassette 2
Cassette 1
Cassette 3
Cancel OK
Status 10/5/2006 10:10
Cassette 4
Multi Purpose
Tray
Item Description
Adjust Print Direction Adjust print direction. Print speed gets a
little slower. Select this item to print on
Prepunched, Preprint and Letterhead.
Speed Priority Give the job speed top priority and pay no
attention to the paper orientation. Select
this item when paper orientation is not
important.
To Next Page
Loading...
Need help?
General
