Vacon 100 flow Applications Manual

Table 51: Standard I/O board analogue output settings, Slot A
Index Parameter Min Max Unit Default ID Description
P3.5.4.1.1 AO1 function 0 31 2 * 10050
17 = ProcessDataIn4
(0-100%)
18 = ProcessDataIn5
(0-100%)
19 = ProcessDataIn6
(0-100%)
20 = ProcessDataIn7
(0-100%)
21 = ProcessDataIn8
(0-100%)
22 = Block Out.1
(0-100%)
23 = Block Out.2
(0-100%)
24 = Block Out.3
(0-100%)
25 = Block Out.4
(0-100%)
26 = Block Out.5
(0-100%)
27 = Block Out.6
(0-100%)
28 = Block Out.7
(0-100%)
29 = Block Out.8
(0-100%)
30 = Block Out.9
(0-100%)
31 = Block Out.10
(0-100%)
P3.5.4.1.2
AO1 filter time 0.0 300.0 s 1.0 * 10051 0 = No filtering
P3.5.4.1.3 AO1 minimum 0 1 0 * 10052
0 = 0 mA / 0V
1 = 4 mA / 2V
P3.5.4.1.4 AO1 minimum scale
-214748.
36
214748.
36
Varies 0.0 * 10053
P3.5.4.1.5 AO1 maximum scale
-214748.
36Varies
214748.
36
Varies 0.0 * 10054
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in 12.1 The default values of parameters in the different applications.
THE ANALOGUE OUTPUTS OF THE EXPANDER SLOTS C, D AND E
Shows only the parameters for the outputs on option boards in slots C, D and E. Make the
selections as in AO1 Function (P3.5.4.1.1).
This group or these parameters do not show, if there are no digital outputs in slots C, D or E.
VACON · 148 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V