Vacon 100 flow Applications Manual

Table 76: Feedback settings
Index Parameter Min Max Unit Default ID Description
P3.13.3.1 Feedback Function 1 9 1 * 333
1 = Only Source1 in use
2 = SQRT(Source1);
(Flow=Constant x
SQRT(Pressure))
3 = SQRT(Source1-
Source 2)
4 = SQRT(Source 1) +
SQRT (Source 2)
5 = Source 1 + Source 2
6 = Source 1 - Source 2
7 = MIN (Source 1,
Source 2)
8 = MAX (Source 1,
Source 2)
9 = MEAN (Source 1,
Source 2)
P3.13.3.2
Feedback Function
Gain
-1000.0 1000.0 % 100.0 1058
P3.13.3.3
Feedback 1 Source
Selection
0 30 2 * 334
0 = Not used
1 = AI1
2 = AI2
3 = AI3
4 = AI4
5 = AI5
6 = AI6
7 = ProcessDataIn1
8 = ProcessDataIn2
9 = ProcessDataIn3
10 = ProcessDataIn4
11 = ProcessDataIn5
12 = ProcessDataIn6
13 = ProcessDataIn7
14 = ProcessDataIn8
15 = Temperature input 1
16 = Temperature input 2
17 = Temperature input 3
18 = Temperature input 4
19 = Temperature input 5
20 = Temperature input 6
21 = Block Out.1
22 = Block Out.2
23 = Block Out.3
24 = Block Out.4
25 = Block Out.5
26 = Block Out.6
27 = Block Out.7
28 = Block Out.8
29 = Block Out.9
30 = Block Out.10
P3.13.3.4
Feedback 1 Minimum -200.00 200.00 % 0.00 336
VACON · 166 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V