Vacon 100 flow Applications Manual

Table 75: Setpoint settings
Index Parameter Min Max Unit Default ID Description
P3.13.2.7 Setpoint 1 Minimum -200.00 200.00 % 0.00 1069
P3.13.2.8 Setpoint 1 Maximum -200.00 200.00 % 100.00 1070
P3.13.2.9 Setpoint 1 Boost -2.0 2.0 x 1.0 1071
P3.13.2.10
Setpoint Source 2
Selection
0 Varies 2 * 431
See P3.13.2.6.
P3.13.2.11 Setpoint 2 Minimum -200.00 200.00 % 0.00 1073 See P3.13.2.7.
P3.13.2.12 Setpoint 2 Maximum -200.00 200.00 % 100.00 1074 See P3.13.2.8.
P3.13.2.13 Setpoint 2 Boost -2.0 2.0 x 1.0 1078 See P3.13.2.9.
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in 12.1 The default values of parameters in the different applications.
PARAMETERS MENU VACON · 165
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V