Vacon 100 flow Applications Manual

2 In the Edit mode, the slot value DigIN SlotA is
underlined and blinks. If you have more digital
inputs available in your I/O, for example, because of
option boards in slots C, D or E, make a selection of
them.
STOP
READY I/O
Ext Fault Close
P3.5.1.11ID:405
Min:
Max:
DigIN SlotA.3
3 To activate the terminal 3, push the arrow button
Right again.
STOP
READY I/O
Ext Fault Close
P3.5.1.11ID:405
Min:
Max:
DigIN SlotA.3
4 To change the terminal to 6, push the arrow button
Up 3 times. Accept the change with the OK button.
STOP
READY I/O
Ext Fault Close
P3.5.1.11ID:405
Min:
Max:
DigIN SlotA.6
5 If the digital input DI6 was already used for some
other function, a message shows on the display.
Change one of these selections.
STOP
READY I/O
ID:
At least one digital input has
been selected to several
operations.
To prevent possible unwanted
operations, please check all
digital input selection parameters.
VACON · 254 PARAMETER DESCRIPTIONS
10
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V