Vacon 100 flow Applications Manual

Fault
code
Fault ID Fault name Possible cause How to correct the fault
8 610 System fault Defective component.
Operation malfunction.
Reset the fault and restart.
Download the newest software
from the Danfoss Drives website.
Update the drive with it.
If the fault occurs again, ask
instructions from the distributor
near to you.
614 Configuration error.
Software error.
Defective component (a
defective control board).
Operation malfunction.
647 Defective component.
Operation malfunction.
648 Operation malfunction.
The system software is not
compatible with the applica-
tion.
649 A resource overload.
A malfunction in the loading,
restoring or saving a
parameter.
Load the factory default settings.
Download the newest software
from the Danfoss Drives website.
Update the drive with it.
FAULT TRACING VACON · 367
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
11

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V