Vacon 100 flow Applications Manual

Table 12: M1 Quick setup
Index Parameter Min Max Unit Default ID Description
1.10
Motor Nom-
inal Fre-
quency
8.0 320.0 Hz
50.0 /
60.0
111
Find this value f
n
on
the nameplate of the
motor.
1.11
Motor Nom-
inal Speed
24 19200 Rpm Varies 112
Find this value n
n
on
the nameplate of the
motor.
1.12
Motor Nom-
inal Current
I
H
* 0.1 I
S
A Varies 113
Find this value I
n
on
the nameplate of the
motor.
1.13
Motor Cos
Phi (Power
Factor)
0.30 1.00 Varies 120
Find this value on the
nameplate of the
motor.
1.14
Energy Opti-
misation
0 1 0 666
The drive finds the
minimum motor cur-
rent to use less
energy and to lower
the motor noise. Use
this function with, for
example, fan and
pump processes.
0 = Disabled
1 = Enabled
1.15
Identifica-
tion
0 2 0 631
The identification run
calculates or meas-
ures the motor
parameters that are
necessary for a good
control of the motor
and speed.
0 = No action
1 = At standstill
2 = With rotation
Before you do the
identification run,
you must set the
motor nameplate
parameters.
1.16
Start Func-
tion
0 1 0 505
0 = Ramping
1 = Flying Start
1.17
Stop Func-
tion
0 1 0 506
0 = Coasting
1 = Ramping
QUICK STARTUP GUIDE VACON · 69
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
1

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V