17.8.5 Deleting Web Passwords
This page lists the engineer and any user and Engineer password that has been created for accessing the
Web browser.
1. Select Users>Web Passwords.
2. Click the Delete button beside the Engineer or user to delete the password.
17.8.6 Configuring Engineer Settings
To configure engineer settings:
1. Select Users>Engineer.
2. Change the ’Engineer’ User Name if required.
3. Click the Change PIN button to change the Engineer PIN (see Changing Engineer PIN and web
password on the facing page).
Note: To comply with INCERT approvals, the user’s PIN code must contain more than 4 digits.
4. Select the Language that will be used by the engineer. (Only displayed if multiple languages
available – see Upgrading Languages on page340.)
Access Control
Attribute Description
Card
Number
Enter card number. Enter 0 to unassign the card.
Void Card Check to temporarily disable the card.
Extended
Time
Extend door timers when the card is present.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 207 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
