Devices compatible with a one-way transceiver
Wireless sensors ADM-I12W1 Wireless Fresnel PIR detector, 12m wide angle
IR160W6-10 Wireless PIR detector with black triplex mirror, 18m wide angle,
868MHz
IMKW6-10 Wireless magnet contact, 868MHz
IMKW6-10B Wireless magnet contact, 868MHz (brown)
OPZ-W1-RFM6 SiWay radio module (plug-in to smoke alarm)
IRCW6-11 Remote control FOB with 4 button control
IPAW6-10 Personal transmitter
WPA Wireless personal alarm
Devices compatible with a two-way transceiver
Wireless sensors WPIR Wireless 12m PIR detector with pet immunity option
WPIR-CRT Wireless curtain PIR detector
WMAG Wireless magnetic contact (slim)
WMAG-I Magnetic contact with additional input
WRMT Remote control FOB with 4 button control
WPAN Wireless personal alarm button
For instructional videos on wireless devices and transceivers please go to
http://van.fyi?Link=Wireless_devices.
17.9.1 One-way wireless
The following devices can be enrolled on a one-way wireless transceiver:
l Wireless sensors
l WPA-Wireless Personal Alarm
l IPAW6-10
l IRCW6-11
Please note that you must disable two-way wireless before enrolling these devices.
To disable two-way wireless:
1. Select Configuration > Hardware > Wireless > Wireless Settings.
2. Disable Two Way Wireless.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 210 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
