ATP Faults
ATP Monitoring
Fault
Select to generate an ATP fault if the ATP monitoring fails or an event
fails to transmit on the ATP.
Event Timeout The amount of time that the ATP will keep trying to transmit the event
until the event fails on the ATP and is passed to the next ATP. Default: 2
minutes.
l 30 seconds
l 60 seconds
l 90 seconds
l 2 minutes
l 3 minutes
l 5 minutes
l 10 minutes
3. Click Save.
Edit Installation Details
The installation details are passed to the RCT to help the operator to identify the panel.
1. Click the Edit Installation Details button.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 316 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
