Disposal
35
Original instructions: N4 Impression
Document version: H – 05/2019
Fig. 47:
Assembling a tool magazine
7 Disposal
7.1 Disposing of the cooling liquid
The product contains neither PCB nor other chloropar-
ans.
Waste code number: 120109, machining emulsions and
solution free of halogens
Burden of proof: yes
h Avoid entry of new or used machining emulsion into the
soil, in waters or into the canalisation.
h Recycle or incinerate the machining emulsion at autho
-
rised facilities. For this, transfer it to approved disposal
companies.
h Keep a reference sample of the disposal product for at
least 6 months.
h Abide the national and local laws of the disposal location
in any case.
7.2 Disposing of the machine
We will dispose of the machine at no cost. The owner will
bear the costs for disassembly, packaging and transport.
h Before sending in the machine for disposal, contact cus
-
tomer service
h If you dispose the machine yourself, abide the national
and local laws of the disposal location.
To Next Page
Loading...
