Wacker Neuson WL34 - Engine Air Filter Dust Valve; Engine Air Filter

1-46 SHB WL34 * 2.0
1 Maintenance
Maintenance
Engine air filter dust valve
Check the discharge slot on the engine air filter dust valve for dirt.
Remove dust deposits by pressing the engine air filter dust valve together.
Engine air filter
Checking/cleaning/replacing the main engine air filter
NOTICE
Technical damage due to dirty engine air filter.
► Clean or replace the engine air filter according to the maintenance
intervals specified in this Operator’s Manual , or if the symbol in the
indicating instrument appears between the maintenance intervals.
Preparations
1. Park the machine on firm, level and dry ground.
2. Apply the parking brake.
3. Fully retract the loader unit and lower it to the ground.
4. Stop the engine.
5. Wait one minute.
6. Open the engine cover.
Removing the engine air filter
1. Remove the fasteners on the cover.
➥ Remove the cover.
2. Pull out main engine air filter H.
The safety engine air filter S is not to be removed.
3. Check the intake line between the engine air filter and the engine.
- Check for leaks
- Check for tightness
4. Clean the main engine air filter H by knocking it gently and blowing
compressed air from inside toward the outside.
5. Replace the main engine air filter H if it is too heavily contaminated.
Fig. 54
Fig. 55
S
H