Wacker Neuson WL34 - 1.14 Heating and Ventilation; Heating Maintenance; Maintenance of Cabin Breather Filter

SHB WL34 * 2.0 1-61
Maintenance 1
Maintenance
1.14 Heating and ventilation
Heating maintenance
Information
This heating does not require any special maintenance.
Maintenance of cabin breather filter
The machine is equipped with a dry-type air filter that filters the intake air
for cabin ventilation. The filter is located at the front of the cabin, above
the center joint of the machine.
1. Unscrew the cover of filter housing 1.
2. Pull out filter 2.
3. Insert a new filter.
4. Screw on the cover of filter housing 1.
Information
Replace the cabin breather filter once a year. Replace more frequently if
the machine is used for dusty applications.
Fig. 70
1
2