SHB WL34 * 2.0 1-67
Maintenance 1
Maintenance
Inflating the tires
Injury hazard due to bursting tires!
Inflating the tires can cause accidents resulting in serious injury or death.
► Use only filling devices with calibrated pressure gages to inflate the
tires.
► When inflating the tires, ensure that no one is in the danger zone.
These instructions relate to inflating tires after loss of pressure. Observe
the prescribed inflation pressure for the machine tires – see "Tyres" on
page E-7.
The tire valve must be in the topmost position if the wheels are filled with
water.
Preparations
1. Park the machine on firm, level and dry ground.
2. Apply the parking brake.
3. Fully lower the loading frame to the ground.
4. Stop the engine.
Duct
1. Unscrew the protective cap from the tire valve.
2. Position the valve connection of the filling device on the tire valve so
that it securely remains in place.
3. Pump up the tire to the prescribed pressure.
4. Remove the valve connection of the filling device from the tire valve.
5. Screw the protective cap onto the tire valve.
To Next Page
Loading...
