1-6 SHB WL34 * 2.0
1 Maintenance
Maintenance overview
1.2 Maintenance overview
Daily/weekly maintenance
Work to be performed by the operator Daily Every week
Clean the machine •
Clean the air filter •
Check the machine for general damage •
Check the coolant level •
Checking the engine-oil level •
Check the engine for leaks •
Check the hydraulic oil level •
Check the tire condition and pressure •
Check all bolts for tightness •
Check the wheel bolts •
Check the braking system for correct function •
Check the brake fluid •
Check the washer system and wiper water level •
Check the seat belt •
Check the instruments and indicator lights, and the acoustic warning devices for
correct function
•
Check the electrical system and lights for correct function •
Check the brake/inching pedal for correct function •
Check the steering system •
Check control levers and switches for correct function •
Check the attachments •
Check the exhaust for malfunctions and excessive smoke •
Perform grease lubrication according to the lubrication plan, including of the attach-
ments
•
Check the protective ROPS/FOPS structure •
Clean the preliminary separator of the fuel filter •
Check the machine axles for leaks •
Check the hydraulic oil and water radiator for leaks and dirt, clean it if necessary •
Check the attachments for safety and correct function •
Check the routing of the hoses, pipe lines and electric lines •
Check the air filter and intake hose •
Check the engine mounting and axle mounting •
Perform a general safety check, General safety check on page 1-21 •
To Next Page
