1-72 SHB WL34 * 2.0
1 Maintenance
Exhaust gas treatment
1.21 Exhaust gas treatment
Information on exhaust-gas treatment
The engine exhaust system is equipped with a diesel particulate filter.
The exhaust system becomes very hot, there is a burn hazard!
Can cause serious burns. Exhaust-gas temperatures at the exhaust
system can reach about 600°C (1112°F) during regeneration, even if the
engine is running at idling speed.
► Keep your hands clear of the exhaust outlet.
► Keep a safe distance from the exhaust system.
► Do not open the engine cover if the exhaust system is hot.
The exhaust system becomes very hot, there is a fire hazard.
Hot exhaust gases in environments with easily flammable material can
cause fires and considerable damage to property.
► During regeneration of the diesel particulate filter, ensure that there is
no easily flammable material (for example paper, dry grass, straw,
wood, wood ceilings, oil, fuel, etc.) in the immediate vicinity of the
exhaust system.
► Do not stop the machine with the engine running in the immediate
vicinity of easily flammable and combustible material, for example,
grass or straw.
► Do not use corrosion-protection agents for the exhaust system. They
can catch fire if the exhaust system is hot.
► In environments with easily flammable material, disable the "automatic
regeneration" mode.
► In environments with easily flammable material, do not activate
"Manual regeneration".
Repairs on the diesel particulate filter may only be performed by
authorized Perkins/Deutz distribution partners.
The diesel particulate filter is a wear part and has to be checked/cleaned
or replaced every 3000 operating hours.
Maintenance
Exhaust gas treatment
To Next Page
Loading...
