SHB WL34 * 2.0 1-21
Maintenance 1
Maintenance
Information on cleaning
Clean a new machine only with a sponge (for the first three months). As
the bottom layers of the paintwork are not fully hardened yet, the
paintwork can be damaged if cleaned with a high-pressure cleaner.
Observe the following when cleaning the machine with a high-pressure
cleaner:
► Max. water pressure 130 bar.
► Max. water temperature 80°C
In order to avoid damage to labels and other sensitive parts, do not hold
the nozzle of the high-pressure cleaner too close to the machine.
General safety check
Check the following points:
• Check all steel parts for damage and loose threaded fittings, in
particular the protective ROPS/FOPS structure.
• Check the condition of the seat belt.
• Check the quickhitch for the attachments.
• Check whether all pivot pins are in their correct positions and secured
with their locks.
• Check the climbing aids and handholds for correct position.
• Check the cabin windows for damage, cracks and stone impacts.
• Check the condition of the lights and working lights.
• Check the tires for damage and penetration of sharp-edged objects.
• Check the condition of all warning and information labels.
To Next Page
Loading...
