Wacker Neuson WL34 - Removing;Installing the Starter

SHB WL34 * 2.0 2-9
Engine 2
Perkins 404D-22 engine
Removing/installing the starter
1. Disconnect the battery – see “Removing the battery” on page 1-57.
2. Remove the cable ties and place the connecting piece of the lighting to
the side.
3. Remove nuts 1 and pull off cable.
4. Remove nut 2.
5. Remove nut on the opposite side.
6. Remove starter.
Install in the reverse order.
Fig. 94
1
2
Engine
Perkins 404D-22 engine