SHB WL34 * 2.0 1-15
Maintenance 1
Maintenance
1.3 Fluids and lubricants
Fluids and lubricants (overview)
When filling oil, the oil level must reach the marks on the dipsticks or
control screws.
The machine can be fitted with different engines. The engine output of the
machine is specified on the type label.
Perkins engine 404D-22 (35.7 kW)
Position Capacity Fluid Specification
Front axle 4.0 liters (1.1 gal.)
Gearbox oil SAE 90 GL 5 API GL5 – MIL2105
Rear axle 4.7 liters (1.2 gal.)
Complete hydraulic sys-
tem
75 liters (19.8 gal.)
Hydraulic oil HLP ISO VG 46
Hydraulic oil reservoir 65 liters (17.2 gal.)
Grease lubrication points Multi-purpose grease Water-resistant
Braking system 1.0 liters (0.3 gal.) ATF oil
Position Capacity Fluid Specification
Fuel tank 55 liters (14.5 gal.) Diesel fuel ASTM D 2896
Engine oil with filter 8 liters (2.1 gal.)
Engine oil SAE 10W40
ambient temperature
-20 °C to +40 °C
(-4 °F–104°F)
API CH-4
Cooling system contents 10 liters (2.6 gal.)
Water with commercially
available HD coolant/anti-
freeze
HD coolant/antifreeze:
ASTM D4985
To Next Page
Loading...
