SHB WL34 * 2.0 E-25
Introduction E
Safety instructions
E.4 Safety instructions
Pay particular attention to the following
To eliminate risks, the instructions in this service manual must be read
and observed by every person using, servicing, repairing, maintaining or
inspecting this machine.
In particular, read this section on safety.
Safety symbols and signal words
Explanation
The following symbol identifies safety instructions. It is used for warning
against potential personal risk or danger.
DANGER identifies a situation causing death or serious injury if it is
not avoided.
Consequences in case of non-observance.
► Avoidance of injury or death.
WARNING identifies a situation that can cause death or serious
injury if it is not avoided.
Consequences in case of non-observance.
► Avoidance of injury or death.
CAUTION identifies a situation that can cause injury if it is not
avoided.
Consequences in case of non-observance.
► Avoidance of injury.
NOTICE identifies a situation that causes damage to the machine if it is
not observed.
► Avoidance of damage to property.
The warning and safety signs attached to the machine provide important
information for safe operation. Compliance is for your safety.
Introduction
Safety instructions
To Next Page
Loading...
