Wacker Neuson WL34 - Explanation of Symbols and Abbreviations

SHB WL34 * 2.0 E-3
Introduction E
Notice on this service manual
Explanation of symbols and abbreviations
The indication left or right in the descriptions always refers to the travel
direction of the machine.
Symbols Explanation
• Identifies a general list
1
Identifies a list in a table (position numbers)
2
1.
Identifies activities that must be performed in a cer-
tain order
2.
➥ Identifies results
►
Identifies things to be avoided in the warning and
safety instructions
Abbreviations Explanation
Fig. Figure
Order no. Order, item or part number
o/h Operating hours
BMK Oil and fuel identifiers
FMI Failure Mode Identifier
FOPS Falling Object Protective Structure
(opt) Option
ROPS Roll Over Protective Structure
SW Quickhitch (loader unit)
(WSxx) Wrench size, for example WS13 = wrench size 13