Wacker Neuson WL34 - Error Codes

SHB WL34 * 2.0 9-13
Electrical system 9
Malfunctions of the machine electronics
Error codes
If the machine electronics issues an error, an error code is displayed in the
indicating instrument. Make a note of the error code before stopping the
engine. Some error codes do not appear any more after switching off the
starter, even though the error may still be present.
NOTICE
Failure to observe the error codes can cause serious technical damage!
► For troubleshooting, connect the Wacker Neuson diagnostic system
WANDA. Remove cover cap 1 and connect the interface with the
machine. Then follow the instructions in the WANDA operator’s
manual.
Fig. 258
Fig. 259
1