1 Maintenance
1.1 Information on maintenance
Responsibilities and prerequisites
• The maintenance and inspection personnel must have specialized
knowledge about the maintenance and inspection work on the
machine.
➥ The necessary expertise can be obtained at training sessions from
Wacker Neuson Service.
• Perform maintenance and inspection work only with suitable protective
equipment.
- Wear ear protectors in case of high noise levels.
Safety instructions
Information on maintenance
• Only perform maintenance and inspection work after having read and
understood the Operator’s Manual.
• Pay attention to the basic safety instructions and to all the warning
labels affixed on the machine.
• The Operator’s Manual describes the work to be performed.
- However, the descriptions of the work processes provide the
required information only to experienced personnel having appro-
priate knowledge.
• Always store the Operator’s Manual in the place provided for it on the
machine.
Information on the machine and the attachment
• Only perform maintenance and inspection work if the machine is
secured.
• A raised loader unit can fall suddenly and cause serious injury.
• A raised loader unit must be secured with a suitable support if it is
absolutely necessary to work underneath it.
• Lower attachments on the ground ensuring that no movements can
occur when releasing mechanical or hydraulic connections.
• Secure equipment or components that are to be attached or removed,
or whose installation position is to be changed, with the aid of suitable
lifting gear or with mounting or support devices to prevent unintentional
movement, slipping or falling.
• Remove dirt from steps and handholds to keep them safe and ready
for use.
Maintenance
Maintenance overview
To Next Page
Loading...
