Wacker Neuson WL34 - Traveling Drive;Axles; Machine-Travel Hydraulics; Brakes

E-6 SHB WL34 * 2.0
E Introduction
Technical data
Traveling drive/axles
Axles
Machine-travel hydraulics
Brakes
Service brake
Description of axles
Front axle Rigid planetary axle screwed onto chassis
Rear axle Rigid planetary axle screwed onto chassis
Machine with Perkins engine 404D-22 (35.7 kW)
Oil flow l/m (gal/min) 104 (27.5)
Operating pressure bar (psi) 450 (6527)
Travel speed kph (mph) 0 – 20 (12.4)
Optional travel speed kph (mph) 0 – 28 (17.4)
Machine with Perkins engine 404F-22 (35.7 kW)
Oil flow l/m (gal/min) 104 (27.5)
Operating pressure bar (psi) 450 (6527)
Travel speed kph (mph) 0 – 20 (12.4)
Optional travel speed kph (mph) 0 – 28 (17.4)
Machine with Deutz engine TD2011L04 (55.1 kW)
Oil flow l/m (gal/min) 129 (34)
Operating pressure bar (psi) 450 (6527)
Travel speed kph (mph) 0 – 20 (12.4)
Optional travel speed kph (mph) 0 – 28 (17.4)
Description of service brake
Design
Hydraulic drum brake. On both axles via cardan
shaft
Location Front axle
Brake fluid ATF oil