Wacker Neuson WL34 - 1.16 Axles;Travel Drive; Checking and Replacing the Axle Oil

SHB WL34 * 2.0 1-63
Maintenance 1
Maintenance
1.16 Axles/travel drive
Checking and replacing the axle oil
Preparations
1. Park the machine on firm, level and dry ground.
2. Apply the parking brake.
3. Fully retract the loader unit and lower it to the ground.
4. Stop the engine.
Checking the axle oil level
1. Raise the wheels at the reduction gears with a jack and turn them so
that the wheel check plugs are centered.
2. Unscrew the Allen screws 1 and 2.
➥ The gearbox oil must be up to the bottom edge of the filler opening.
3. Add gearbox oil if necessary.
4. Screw the Allen screws 1 and 2 back in.
Fig. 72
1
2