2-8 SHB WL34 * 2.0
2 Engine
Perkins engine 404D-22 (35.7 kW)
22.Secure the variable displacement pump using squared timber and
tension belts.
23.Disconnect the connection between the variable displacement pump
and the engine. To do this, remove all cylinder screws from the clutch
case.
Injury hazard when lifting heavy components.
Death or serious injury.
► Use lifting gear of sufficient lifting capacity
► Use functionally safe lifting gear
► Use lifting gear on firm and level ground
► Fasten the lifting gear in a suitable position of the component, or in a
position provided for this
24.Attach lifting gear to the engine.
25.Slightly tension the lifting equipment.
26.Remove the screws from the four engine brackets.
27.Slightly lift the engine, pull it to the rear and then lift it outward.
Install in the reverse order.
Only use new one-ear clams for the installation!
To Next Page
Loading...
