Wacker Neuson WL34 - Page 96

1-40 SHB WL34 * 2.0
1 Maintenance
Maintenance
4. Screw off the oil filter 4 and replace with new one. Be sure to wet the
seal of the new motor filter with oil (example Perkins engine 404D-22).
5. Unscrew hose with drain coupling.
6. Screw on the cap of the oil drain valve.
7. Add engine oil.
8. Start the engine and let it run briefly at low speed.
9. Stop the engine.
10.Wait a moment until all the oil has run into the oil sump.
11.Check the oil level again.
12.Add if necessary and check again.
13.Completely remove all oil spills from the engine.
Fig. 48
4