WSTECH APS Series - Figure 4: Example of a Type Plate

Original Operating Instructions
APS Series – Outdoor Hybrid Inverter
User Information
APS-Series 120 Operating Instructions v320 EN
Page 13 of 213
The type plates (Figure 4) and option plates (Figure 5) of the APS Outdoor Hybrid
Inverter (hereinafter referred to as APS or product) are located at the bottom-right of
the front side as well as inside of the control unit).
Figure 4: Example of a type plate
Pos.
Description
1
Manufacturer
2
Hardware version (HW) and wiring diagram version (WD)
3
Technical data DC side
4
Degree of protection
5
WEEE identification
6
Technical data AC side
7
Product identification
8
Serial number