EasyManua.ls Logo

WSTECH APS Series - Transporting the APS

WSTECH APS Series
213 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Original Operating Instructions
APS Series Outdoor Hybrid Inverter
Packaging, Transport, Delivery, Storage
APS-Series 120 Operating Instructions v320 EN
Page 47 of 213
3.2 Transport of APS without Cooling Tower
WARNING!
Danger to life due to falling objects!
The product can fall or tip over when transported incorrectly, which may
cause damage to the product and result in serious injury or death.
Wear suitable personal protective equipment for all work on the
product.
The product must be transported by persons who have the
knowledge described in Section Target Audience.
Only transport the product using suitable transport facilities with
sufficient load bearing capacity.
The product must not be lifted in an upright position.
Do not stand under suspended loads.
Only remove the transport safeguards when the product is
standing at the intended installation site.
The manufacturer accepts no liability for damage caused through not complying with
the terms of transport.

Table of Contents