Original Operating Instructions
APS Series – Outdoor Hybrid Inverter
Packaging, Transport, Delivery, Storage
APS-Series 120 Operating Instructions v320 EN
NOTICE
Damage to the product due to incorrect storage!
Storage of the product with or without packaging, unassembled and in
disconnected condition can lead to ingress of moisture and dirt.
• Packaging is only suitable for dry conditions.
• After unpacking assemble and connect immediately or keep the
product dry and clean.
The product must be stored only under the following conditions:
• Temperature: -40 °C to 60 °C
• Relative humidity: < 80%.
To Next Page
Loading...