WSTECH APS Series - Packaging, Transport, Delivery, and Storage

Original Operating Instructions
APS Series – Outdoor Hybrid Inverter
Packaging, Transport, Delivery, Storage
APS-Series 120 Operating Instructions v320 EN
Page 42 of 213
3 Packaging, Transport, Delivery, Storage
3.1 Packaging
The packaging of the APS and cooling tower depending on the order. In the following
possible packaging variants are described. The safety sign on the packaging must be
observed (Section 1.8).
3.1.1 Distribution on Special Pallets
The APS and cooling tower are delivered on special pallets (hereinafter referred to as
pallets). The dimensions of the APS and cooling tower on the pallets are shown in
Figure 23 to Figure 25.
The APS is mounted to the pallet with hexagon screws M12. The cooling tower is
mounted to the pallet with screws.
NOTICE: Loose the screws before lifting the APS or cooling tower.