WSTECH APS Series - Table 5: Separate Package - Cooling Tower; Table 6: Cabinet Keys; Table 7: Accessories

Original Operating Instructions
APS Series – Outdoor Hybrid Inverter
Packaging, Transport, Delivery, Storage
APS-Series 120 Operating Instructions v320 EN
Page 53 of 213
Table 5: Separate package – cooling tower
Required
material
Description
Part No.
Substitute
material
2
Steel shaft Ø 60 mm x 1600 mm
340820
-
2
Cooling fluid hoses with couplings
(APS with 1-2 APUs)
320144
320145
-
4
Cooling fluid hoses with couplings
(APS with 3-4 APUs)
320144 (2 each)
320145 (2 each)
-
1 can
(30 litres)
Cooling fluid (50% glycol, 50% distilled
water) (APS with 1-2 APUs)
720264
-
2 can
(60 litres)
Cooling fluid (50% glycol, 50% distilled
water) (APS with 3-4 APUs)
720264
-
30 g
Assembly paste (WEICON ASW 030)
720305
-
19 pcs.
Hexagon nut
440055
-
23 pcs.
Bonded sealing
990179
-
19 pcs.
Spring lock washer
430100
-
4 pcs.
Wing nut
440048
-
20 pcs.
Washer
430091
-
Table 6: Cabinet keys
Quantity
Cabinet keys for:
Numbered tag
3
Control unit (+C1)
1
3
DC distributions (+C2, +C5) and
Power units (+C3, +C6)
2
3
Master key
Enter number here
1_________
Table 7: Accessories
Description
Quantity
MV skid
1
Self-sealing strip
2 m
Mounting material
1
The required material for installation, operation and commissioning is inside the
product or in a separate package. If material is not included in scope of delivery it is
identified as such.