NOTICE
Damage to components due to ingress of dirt, dust and moisture
as well as intrusion of pests and vermin!
Ingress of dirt, dust, moisture and intrusion of pests and vermin can
lead to damages of components.
• After unpacking mount the cooling tower and cable entry of the
AC connection immediately at the installation site according to
these operating instructions.
• Check the bursting discs and all cable entry grommets for
tightness.
• Seal the openings of the cable entry of the AC connection
waterproof and airtight, if the MV transformer is connected later.
• Never leave the doors unattended open.
• Open the doors only if it is absolutely necessary and close
quickly.
• Remove dust and water accumulation and all intruded pests and
vermin as well as existing dirt (e.g. excrement, nests) from the
interior area.
• Place only baits and poisons in solid form or in containers in the
product.
• The use of baits and poisons in liquid, gas or powder form are
not allowed.
• Never connect and operate the product if the interior area is
polluted, damp or/and infested with insects.
• Before connecting the product baits and poisons as well as
pests and vermin must be removed without trace.
To Next Page
Loading...