NOTICE
Damage to the product due to ingress of moisture and dust!
Loosen screw connection of doors and covers, faulty door position,
incorrect closing of the doors, damaging of the cabinet as well as its
door gaskets and plastic cover profile leads to lower IP code.
• Ensure that the product has no mechanical damage.
• Check the torque of the screw connections.
• Closing doors with pressure 3 points (below, middle, above) at
the same time.
• If questions or problems arise, please contact customer service.
NOTICE: After each transport the following points must be checked.
4.3.1.1 Torque Check on the Cabinet Key Places
To Next Page
Loading...