Original Operating Instructions
APS Series – Outdoor Hybrid Inverter
User Information
APS-Series 120 Operating Instructions v320 EN
WARNING!
Risk of hearing damage due to loud noises of the product!
The product generates loud noises during operation. This can cause
hearing damage.
• Wear hearing protection whenever working on the product.
CAUTION!
Damage to components due to entering Sections +C3 and +C6!
Damage to components can affect the functioning of the product. This
can lead to lesser or lighter injury.
• Enter Sections only if the AC/DC cables are not under voltage
and are disconnected from the product externally.
• Do not setp on the transparent bursting disc.
• Only step on free bottom areas.
NOTICE
Damage to components due to existing of termites!
Termites can get into the product and damage the components.
• Ensure that at the installation site and at the surrounding area
no termites exist.
• If the installation site is in a termite infested area, the termites
must be eliminated with appropriate measures before product
installation.
NOTICE
Damage to components due to electrostatic discharge!
Electrostatic discharge can damage the components.
• Wear suitable personal protective equipment for all work on the
product.
• Perform all work on the product in accordance to IEC 61340-5-1.
• Avoid direct contact with components on PCB or its conducting
path.
NOTICE: The manufacturer does not accept responsibility for errors or damage if
safety regulations are not met during handling, operation and maintenance.
To Next Page
Loading...