Xerox Phaser 3250 - Page 101

3-10 Phaser 3250 Laser Printer Service Manual
Error Messages and Codes
2 Does the error still occur? Go to step 3. Complete.
3 1.Check the Exit Sensor for damage.
2.Is the Exit Sensor damaged?
Replace the Exit
Sensor
(page 8-55).
Go to step 4.
4 1.Check the LVPS for correct
installation. Reseat the LVPS
(page 8-67).
2.Does the error still occur?
Replace the
LVPS
(page 8-67).
Go to step 5.
Complete.
5 1.Check the Main Controller Board for
correct installation. Reseat the Main
Controller Board (page 8-62).
2.Does the error still occur?
Replace the
Main Controller
Board
(page 8-62).
Complete.
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No