Phaser 3250 Laser Printer Service Manual 8-11
Service Parts Disassembly
MEA Pick Up Unit (Pick-Up Roller) (PL6.1.26)
1. Remove Tray 1.
Be sure not to lift the PMO Pick-Up Idle latch too high. This will prevent
the Pick-Up Idle to secure in place for installation.
2. Use a flat tip screwdriver to release the PMO Pick-Up Idle (PL6.1.23)
latch from the Pick-Up Shaft (PL6.1.24).
3. Slide the Pick-Up Idle toward the left side pass the groove on the shaft.
To Next Page
Loading...
